The steel products processing department

• Cutting machine for hot-rolled coils
  • Raw material: 4 - 8 mm thickness and 1000 - 1950 mm width hot-rolled coils
  • End-product: strips with a minimum width of 200 mm
  
  
• Cutting machine for cold-rolled, galvanized coils and pre-dyed sheet.
  • Raw material: cold-rolled coils, galvanized coils, pre-painted coils:
    - thickness: 0,30 - 3 mm
    - width : 1000 - 1500 mm
  • End-product : strips with a minimum width of 30 mm

• Flattening and crosscutting (in sheets) machine for hot-rolled coils
  • Raw material : hot-rolled coils with:
    - thickness : 3 - 16 mm - width : 700 - 2000 mm
  • End-product : steel sheets with:
    - thickness : 3 - 16 mm
    - width : min. 700 - 2000 mm
    - length : 500 - 12000 mm
    
• Flattening and crosscutting (in sheets) machine for cold-rolled, galvanized and pre-painted sheet
  • Raw material : cold-rolled coils, galvanized coils and pre-painted coils:
    - thickness : 0,30 - 3 mm
    - width : 700 - 1500 mm
  • End-product : steel sheets with:
    - thickness:0,30 - 3 mm
    - width:min. 700 - 1500 mm
    - length : 500 - 4000 mm

• Profiling machine of cold-rolled, galvanized and pre-painted coils
  • Raw material : cold-rolled coils, galvanized and pre-painted coils with:
    - thickness : 0,4 - 0,9 m
    - width : 1000 mm
  • End product : profiled sheets ( h=40 mm)
    - width : 735 m - length : 1500 - 13500 mm

• Automatic cutting machine with plasma and computer-assisted numeric command
  • Raw material : hot-rolled and cold-rolled plates:
    - thickness : 1,5 - 12 mm
    - width : 500 - 2500 mm
    - length : 1000 - 12000 mm
  • End-product: parts on which an individual tag can be applied.

• Profiling line for gypsum-carton systems
  • Raw materials: galvanized strips:
    - thickness : 0,5 - 0,6 mm
    - width : 57 - 208 mm
  • End-product: galvanized profiles:
    UW 20 - UW 100
    CW 50 - CW 100
• Drawing line for steel light profiles
  • Raw material : hot-rolled and cold-rolled strips:
    - thickness : 1,5 - 3,0 mm
    - width : 80 - 160 mm
    
  • End-product :
    supporting profile type A ; B ; C ; D
    U-type profile: U 80 - U 200
  
  

• Automatic drilling and cutting line for FICEP 1 profiles
  • thicness : 3,0 x 15 mm
  • Type:
    - angle profile : 35x35 - 150x150
    - U-type profile: U 100 - U 160
    - flat steel with 50 - 50 mm width
  • Drilling diameters : 2 mm - 30 mm
  • length: 1500 - 12000 mm
  
  
• Automatic drilling and cutting line for FICEP 2 profiles
  • thickness : 8,0 x 25 mm
  • Type:
    - angle profile: 80x80 - 200x200
    - U-type profile : U 80 - U 620
    - I-type profile : I 80 - I 620
    - flat steel with 100 - 620 mm width
    - drilling diameters : 6 mm - 32 mm
    - length : 1500 - 12000 mm